Mon-Fri: 7AM-7PM, Sat: 8AM-5PM Licensed & Insured [email protected] Serving Mitchell, SD

Roof Cleaning for Metal Roofs in Mitchell, SD

Soft wash for metal roofs. Soft wash roof cleaning that removes black streaks, moss and lichen without the granule damage pressure washing causes. Typical cost $400-$1,000.

Looking for roof cleaning for metal roofs in Mitchell, SD? We look at the surface first, choose the right method and pressure for it, and give you a price before any work starts. For metal roofs, that means soft wash.

How we clean it

Soft washCleaning method
Soft wash, typically under 500 PSIPressure

Cleaning solution: A mild detergent or soft wash solution suitable for painted metal.

Cleaning metal roofs safely

Painted metal roofs collect dirt, mildew and oxidation chalk. A soft wash cleans them without damaging the coating, and rinsing off salt film matters on coastal homes.

Avoid: High pressure at the seams and fasteners, and abrasive or strongly acidic cleaners that dull the paint.

How often: Every 2-4 years.

Signs you need roof cleaning for metal roofs

  • Black or dark streaks running down the roof
  • Green moss or lichen spots, often on the north side
  • Roof looks older than it is
  • Moss lifting the edges of shingles
  • A home inspector or insurer has noted roof growth

Why it gets dirty

  • Roof algae (often Gloeocapsa magma) spread by wind
  • Shade from trees and the north-facing side staying damp
  • Debris piles in valleys that hold moisture
  • Moss and lichen that root into the roof surface

Safe steps for homeowners

  • Keep valleys and gutters clear of leaves and pine needles
  • Trim branches to let in sun and air
  • Consider zinc or copper strips near the ridge to slow regrowth
  • Look from the ground with binoculars instead of climbing on the roof

Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.

What can go wrong with DIY pressure washing

  • Pressure washing strips granules and can void a shingle warranty
  • Falls from a slippery, wet roof
  • Chemical runoff that burns plants below
  • Water forced under shingles and flashing

Our process for roof cleaning for metal roofs

  1. Check the roof type, pitch and condition from the ground and ladder
  2. Pre-wet and protect plants and cover sensitive areas
  3. Apply a soft wash solution suited to the roofing material
  4. Let it work, then rinse gently or let rain finish the job as recommended
  5. Rinse gutters, downspouts and plants and check the results

Roof Cleaning for Metal Roofs cost in Mitchell, SD

$400-$1,000Typical range for a typical single-story or two-story home
2-4 hoursTypical time on site
Every 3-5 years, or when streaks returnRecommended frequency

What moves the price:

  • Size: square footage of siding, roof or flatwork
  • Condition: heavy growth, old stains and peeling finishes take longer
  • Access: number of stories, roof pitch, slopes and how close we can park
  • Add-ons: sealing, gutter brightening and other services done in the same trip

These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.

Other services for metal roofs

Serving Mitchell, SD and nearby towns

Moss is the bigger roof problem in South Dakota than algae streaks, especially under trees and on north-facing slopes. Moss holds water against the shingles, and ice can form where it sits, so it's worth treating before it lifts shingle edges.

Besides Mitchell (ZIP code 57301), we handle roof cleaning for metal roofs in Huron (46.1 mi), Madison (50 mi), Hartford (54.7 mi) and Lennox (62.1 mi). Call (555) 010-0000 for a free quote in Mitchell.

Roof Cleaning for Metal Roofs: frequently asked questions

How much does roof cleaning for metal roofs cost in Mitchell, SD?

Roof Cleaning for Metal Roofs typically costs $400-$1,000 for a typical single-story or two-story home, and usually takes 2-4 hours. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.

Do you use high pressure for roof cleaning for metal roofs?

For metal roofs: soft wash, typically under 500 PSI. What we avoid: high pressure at the seams and fasteners, and abrasive or strongly acidic cleaners that dull the paint. The cleaning solution does most of the work, followed by a gentle rinse.

Is roof cleaning for metal roofs safe for my plants and pets?

We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.

How often should I schedule roof cleaning for metal roofs?

Every 2-4 years. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.

What if it rains on the day?

Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.

More services

Popular Exterior Cleaning Services in Mitchell, SD

Driveway Cleaning for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $150-$400

Concrete Sealing for Exposed Aggregate

Moderate-pressure wash. Exposed aggregate concrete has stones showing at the surface.

Typical $400-$1,200

Rust Stain Removal for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $150-$500

Pressure Washing for Exposed Aggregate

Moderate-pressure wash. Exposed aggregate concrete has stones showing at the surface.

Typical $150-$600

Driveway Cleaning for Concrete

Pressure wash with a surface cleaner. Plain broom-finish concrete is the surface pressure washing is made for.

Typical $150-$400

Screen Enclosure & Lanai Cleaning

Cleaning pool cages, screen rooms and lanais, including the frame, screens and the deck below.

Typical $200-$500

HOA & Apartment Pressure Washing for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $800-$5,000

Sidewalk & Walkway Cleaning for Concrete

Pressure wash with a surface cleaner. Plain broom-finish concrete is the surface pressure washing is made for.

Typical $100-$250

Concrete Sealing for Stamped Concrete

Moderate-pressure wash. Stamped and colored concrete is usually protected by a sealer.

Typical $400-$1,200

Post-Construction Cleanup

Exterior cleanup after new construction or remodeling: mortar splatter, mud, paint drips and dust on concrete and walls.

Typical $300-$1,200

Exterior Mold & Mildew Removal for Concrete

Pressure wash with a surface cleaner. Plain broom-finish concrete is the surface pressure washing is made for.

Typical $250-$700

Paver Cleaning & Sealing for Travertine

Low-pressure wash. Travertine is a natural limestone popular around pools.

Typical $600-$1,800

Ready for a cleaner home or business?

Get a free pressure washing quote in Mitchell, SD. Tell us what needs cleaning and we'll give you a price and the next available date.

Call NowFree Quote